logo-hal

HALathon 2021 UPPA

Les articles que vous pouvez déposer

# Année Titre Revue Lien éditeur / doi Notice HAL
1 2015 Study of the thermal properties of miscible blends between poly(ether ketone ketone) (PEKK) and polyimide European Polymer Journal 10.1016/j.eurpolymj.2014.10.024 hal-01615993
2 2013 Electrical, rheological and mechanical characterization of multiscale composite materials based on poly(etherimide)/short glass fibers/multiwalled carbon nanotubes Composite Structures 10.1016/j.compstruct.2013.02.025 hal-01559919
3 2013 The effect of twin screw extrusion on structural, electrical, and rheological properties in carbon nanotube poly-ether-ether-ketone nanocomposites Journal of Applied Polymer Science 10.1002/app.38964 hal-01559917
4 2012 The influence of nanoparticles embedded in a matrix on the responses of composite structures to low velocity impacts Revue des Composites et des Materiaux Avances 10.3166/RCMA.22.47-66 hal-01615994
5 2011 Dispersion of multiwalled carbon nanotubes in a rubber matrix using an internal mixer: Effects on rheological and electrical properties Journal of Polymer Science Part B: Polymer Physics 10.1002/polb.22350 hal-01615995
6 2010 Rheological characterization and molecular modeling of poly(n-butyl acrylate) Applied Rheology 10.3933/ApplRheol-20-33685 hal-01598472
7 2009 Optimization of the polymer foam process by the residence time distribution approach Industrial and engineering chemistry research 10.1021/ie800836j hal-01615980
8 2009 Caracterization and modelization of the rheological behavior of pressure sensitive adhesives: the case of block copolymers based on acrylate matrix. Proc. Annu. Meet. Adhes. Soc. hal-01616201
9 2008 optimisation of polymer foam process by the residence time distribution approach Industrial and engineering chemistry research inria-00342769
10 2008 All acrylic block copolymers based on poly (methyl methacrylate) and poly (butyl acrylate). A link between the physico-chemical properties and the mechanical behaviour on impact tests Polymer Testing 10.1016/j.polymertesting.2008.08.008 hal-01615996
11 2005 Rheological properties of hot melt pressure sensitive adhesives (HMPSAs) based on styrene-isoprene copolymers, part 3: Rheological behavior of different block copolymers with high diblock content Journal of Adhesion 10.1080/00218460590954610 hal-01615998
12 2005 Some applications of molecular rheology: Polymer formulation and molecular design Journal of Non-Newtonian Fluid Mechanics 10.1016/j.jnnfm.2005.03.012 hal-01615999
13 2002 From the microstructure of polymers towards their rheological properties [De la microstructure du polymère à ses propriétés rheologiques] Comptes Rendus Physique 10.1016/S1631-0705(02)01416-0 hal-01584336
14 2002 Complex shear modulus determination in a large range of frequency by interconversion of the compliance for a starch/gluten blend [Détermination du module complexe de cisaillement dans un domaine élargi de fréquence pour un mélange gluten-amidon par interconversion de la fonction de fluage] Sciences des Aliments hal-01616000
15 2002 Molecular weight distribution from viscoelastic data: The importance of tube renewal and rouse modes Journal of Rheology 10.1122/1.1428315 hal-01584334
16 2000 Rheological models based on the double reptation mixing rule: the effects of a polydisperse environment Journal of Rheology hal-01584342
17 1998 Determination of the molecular weight distribution of linear polymers by inversion of a blending law on complex viscosities Rheologica Acta hal-01584349

Références complètes

  1. S. Dominguez, Christophe Derail, Frédéric Léonardi, J. Pascal, B. Brulé. Study of the thermal properties of miscible blends between poly(ether ketone ketone) (PEKK) and polyimide. European Polymer Journal, Elsevier, 2015, 62, pp.179-185. ⟨10.1016/j.eurpolymj.2014.10.024⟩. ⟨hal-01615993⟩
  2. Axel Salinier, Sylvie Dagréou, Frédéric Léonardi, Christophe Derail, Nuria Navacués. Electrical, rheological and mechanical characterization of multiscale composite materials based on poly(etherimide)/short glass fibers/multiwalled carbon nanotubes. Composite Structures, Elsevier, 2013, 102, pp.81-89. ⟨10.1016/j.compstruct.2013.02.025⟩. ⟨hal-01559919⟩
  3. Matthieu Guehenec, Victoria Tishkova, Sylvie Dagréou, Frédéric Léonardi, Christophe Derail, et al.. The effect of twin screw extrusion on structural, electrical, and rheological properties in carbon nanotube poly-ether-ether-ketone nanocomposites. Journal of Applied Polymer Science, Wiley, 2013, 129 (5), pp.2527-2535. ⟨10.1002/app.38964⟩. ⟨hal-01559917⟩
  4. S. Denneulin, P. Viot, Frédéric Léonardi, J.-L. Lataillade. The influence of nanoparticles embedded in a matrix on the responses of composite structures to low velocity impacts. Revue des Composites et des Materiaux Avances, 2012, 22 (1), pp.47-66. ⟨10.3166/RCMA.22.47-66⟩. ⟨hal-01615994⟩
  5. M. Charman, Frédéric Léonardi, S. Dominguez, C. Bissuel, Christophe Derail. Dispersion of multiwalled carbon nanotubes in a rubber matrix using an internal mixer: Effects on rheological and electrical properties. Journal of Polymer Science Part B: Polymer Physics, Wiley, 2011, 49 (22), pp.1597-1604. ⟨10.1002/polb.22350⟩. ⟨hal-01615995⟩
  6. N. Jullian, Frédéric Léonardi, B. Grassl, Christophe Derail, J. Peyrelasse. Rheological characterization and molecular modeling of poly(n-butyl acrylate). Applied Rheology, Kerschensteiner Verlag, 2010, 20 (3), pp.1-11. ⟨10.3933/ApplRheol-20-33685⟩. ⟨hal-01598472⟩
  7. M. Larochette, Didier Graebling, Djamel Nasri, Frédéric Léonardi. Optimization of the polymer foam process by the residence time distribution approach. Industrial and engineering chemistry research, American Chemical Society, 2009, 48 (10), pp.4884-4891. ⟨10.1021/ie800836j⟩. ⟨hal-01615980⟩
  8. Nicolas Jullian, Frédéric Léonardi, Christophe Derail, Pierre Gérard, Jean. Peyrelasse. Caracterization and modelization of the rheological behavior of pressure sensitive adhesives: the case of block copolymers based on acrylate matrix.. Proc. Annu. Meet. Adhes. Soc., 2009, 32nd (Copyright (C) 2017 American Chemical Society (ACS). All Rights Reserved.), pp.279--281. ⟨hal-01616201⟩
  9. Mathieu Larochette, Didier Graebling, Frédéric Léonardi, Djamel Nasri. optimisation of polymer foam process by the residence time distribution approach. Industrial and engineering chemistry research, American Chemical Society, 2008. ⟨inria-00342769⟩
  10. T.A. Tran, Frédéric Léonardi, S. Bourrigaud, P. Gerard, Christophe Derail. All acrylic block copolymers based on poly (methyl methacrylate) and poly (butyl acrylate). A link between the physico-chemical properties and the mechanical behaviour on impact tests. Polymer Testing, Elsevier, 2008, 27 (8), pp.945-950. ⟨10.1016/j.polymertesting.2008.08.008⟩. ⟨hal-01615996⟩
  11. M.N. Cazenave, Christophe Derail, Frédéric Léonardi, G. Marin, N. Kappes. Rheological properties of hot melt pressure sensitive adhesives (HMPSAs) based on styrene-isoprene copolymers, part 3: Rheological behavior of different block copolymers with high diblock content. Journal of Adhesion, Taylor & Francis, 2005, 81 (6), pp.623-643. ⟨10.1080/00218460590954610⟩. ⟨hal-01615998⟩
  12. Frédéric Léonardi, Christophe Derail, G. Marin. Some applications of molecular rheology: Polymer formulation and molecular design. Journal of Non-Newtonian Fluid Mechanics, Elsevier, 2005, 128 (1 SPEC. ISS.), pp.50-61. ⟨10.1016/j.jnnfm.2005.03.012⟩. ⟨hal-01615999⟩
  13. Ahmed Allal, S. Lamaison, Frédéric Léonardi, G. Marin. From the microstructure of polymers towards their rheological properties [De la microstructure du polymère à ses propriétés rheologiques]. Comptes Rendus Physique, Centre Mersenne, 2002, 3 (10), pp.1451-1458. ⟨10.1016/S1631-0705(02)01416-0⟩. ⟨hal-01584336⟩
  14. F. Errera, Christophe Derail, Frédéric Léonardi, O. Surel. Complex shear modulus determination in a large range of frequency by interconversion of the compliance for a starch/gluten blend [Détermination du module complexe de cisaillement dans un domaine élargi de fréquence pour un mélange gluten-amidon par interconversion de la fonction de fluage]. Sciences des Aliments, 2002, 22 (3), pp.319-325. ⟨hal-01616000⟩
  15. Frédéric Léonardi, Ahmed Allal, G. Marin. Molecular weight distribution from viscoelastic data: The importance of tube renewal and rouse modes. Journal of Rheology, American Institute of Physics, 2002, 46 (1), pp.209-224. ⟨10.1122/1.1428315⟩. ⟨hal-01584334⟩
  16. Frédéric Léonardi, J.-C. Majesté, Ahmed Allal, G. Marin. Rheological models based on the double reptation mixing rule: the effects of a polydisperse environment. Journal of Rheology, American Institute of Physics, 2000, 44 (4), pp.675-692. ⟨hal-01584342⟩
  17. Frédéric Léonardi, Ahmed Allal, G. Marin. Determination of the molecular weight distribution of linear polymers by inversion of a blending law on complex viscosities. Rheologica Acta, Springer Verlag, 1998, 37 (3), pp.199-213. ⟨hal-01584349⟩